How To Open Bmw Key Fob. Repeat this process exactly, with each new key fob that you’d like to. After you remove the valet key, you will notice a small access port on the keyfob.
After following the third step, with your vehicle key in position and the engine on the ignition mode, press and hold the lock button on the key fob, and then turn the vehicle. The doors should lock and unlock automatically. Place the key in the ignition slot.
Table of Contents
This Is Because If Your Doors Are Left Open, It Could Disrupt The Key Fob’s Reset Process.
Then release the unlock button. Remove the metal blade from the bmw key fob. Holding down the unlock button, press the lock button (bmw logo) three times, then release the unlock button.
If You Have Than One Key Fob To Program, Repeat Step 3 Within 30 Seconds Of The Original Key Programming.
Press the key release button on your key fob 2. Insert the dull utility blade between the base of the metallic portion of the key and one of the plastic side casings. Pry the casing outward slightly using the dull knife blade until a small gap forms around the entire key.
The Metal Key Blade Can Be Used To Open Your Car Door Or Trunk In Case Of An Emergency.
Take the new key and hold down the unlock button while pressing the bmw logo 3 times. The metal key blade can be used to open your car door or trunk in case of an emergency. The doors will automatically lock and unlock.
Remove The Valet Key From The Bmw Key Fob.
Don't use too much force and scratch the key's finish. Remove the metal blade from the bmw key fob. On some key fob models, the groove is towards the bottom of the fob, not in the manual key storage compartment.
Why Does My Bmw Key Fob Not Work After Replacing Battery?
With the latter held down, press the bmw logo three times. Remove the mechanical key from the fob. When this is done, release the unlock button.